History Melted Into Success
Home page / Products / Sewerage / Protecting sill pieces

Protecting sill pieces

For bypasses in protecting sills DN 400

For bypasses in protecting sills

it is suitable to use our resistant protecting sill components. With aid of technology used for piping components we produce needed shape pieces for whole future protecting sill.

It applies to flat tubes or bends, and needed bypass is made by their assembly. Neck and shank of the pieces are made by means of basalt insert, which is glued into the steel jacket.

It is possible to produce various diameters of the pieces and length of the tubes acc. to the requirements, bends of various radii and angles. In practice, it is all up to you and your requirements.

The most advantageous procedure is sending the drawing of required solution to us and we will readily propose you the suitable pieces. 
Please do not hesitate to contact us
Name and Surname *
E-mail *
Request *
I agree with auditing ', handling and storage of personal data contained in TOTM form.
Items marked with an asterisk are obligatory.

Distribution of pavements in the Czech Republic

Distribuce dlažeb v České republice

Distribution throughout the world

Distribuce ve světě

All rights reserved   |    webmap   |    Cookies settings

© 2010  |  Eutit
Generated in Animato Marketingand Publishing System .
Webdesign <spanclass="externi">Animato