T-pieces lined with basalt or eucor are produced acc. to customer’s requirements in various inner diameters and lengths. Nominal inner diameters (Js) of individual pieces depend on produced inner diameters of tubes (see tubes).

Lengths of T-pieces (L= continuous segment, L1= branching segment) may vary. Length L is normally max. 1m (not necessarily). Length L1 depends on size of whole piece and connecting dimensions of other piping pieces.

T-pieces are coupled with other piping pieces with flange joints. Here both fixed, and turning flanges may be used acc. to parameters of the route for pressure PN6, PN10 and PN 16 acc. to DIN standard.

These piping pieces are fitted with 1x prime coat V2000 colour 0840 – red-brown.

Technical sketch of T-piece for download:

EUTIT s. r. o., Basalt and eucor casting plant, č.p. 196, 353 01 Stará Voda
Tel.: +420 354 789 111, +420 354 391 301, Fax: +420 354 691 480
e-mail: eutit@eutit.cz, www.eutit.cz</